Buy PRICOM 3100 Direct attach Parallel IPV6 10/100 Print ServerPRICOM 3100 Direct attach Parallel IPV6 10/100 Print Server Product Description:
- Works with most parallel printers. Attaches directly to port. IPv6 compatibility.
Product Description
SILEX TECHNOLOGY AMERICA INC Silex PRICOM SX-3100 Print Server - 1 x 10/100Base-TX Network, 1 x Parallel - 10Mbps, 100MbpsThepalm-sized, external, multi-protocol 3100 print server is compatible with virtually all major printers using their parallel interface. The embedded solution can monitor for typical printer status suchas paper out or error conditions Additionally, the 3100 can retrieve E-mail from the mail server and print to the printer without any PC. It also cansend an e-mail message to you when any error occurs with the printer.
Customer Reviews
Most helpful customer reviews
2 of 2 people found the following review helpful.
Difficult install but works great
By J. A. Hinz
We own 3 of these. Each installed on a Sharp AR-M207(EB) copier in 3 different offices and each serving a small (fewer than 8) peer-to-peer WinXP network. I don't know how the PriCom 3100 would install on any other printer but here is what I learned regarding these Sharp copiers. Maybe it will help somebody else.I didn't get much help from Silex (PriCom) due to their lack of experience with this Sharp unit. They tried but had no real suggestions. Sharp support website was almost no help at all. 2 separate Sharp dealers had only very limited experience. Here is what I finally did for a successful installation and subsequent trouble-free operation.Sharp AR-M207(EB) Network InstallPeer-to-peer network, Windows XP SP2 & Windows 2000 ProfessionalPrintserver: Silex Pricomm 31001. Install Pricomm as instructed, using automatic (recommended) settings.2. Take note of IP Address that Pricomm software assigns to Printserver.3. Go to Add Printer on each computer on the network.4. Even though this is a network printer, select "Local Printer attached to this computer."5. Clear the Detect Plug and Play checkbox.6. Select Create a New Port7. Set Port Type to Standard TCP/IP8. Enter the IP Address that Pricomm assigned earlier.9. Complete the printer installation process. The driver is on the Sharp CD at \Drivers\Printer\EnglishA\SPCL\2KXP. Driver must be installed on each computer on the network.10. Be sure to choose Do Not Share as you're completing the install.11. Windows may inform you that the printer software isn't digitally signed. Install anyway.Make sure your router includes the assigned IP address in its range of acceptable addresses.PriCom 3100 does not enable shared scanning. Not designed for that. You can only scan to 1 host computer via the USB connection on the AR-M207 but you can easily share the destination folder with the entire network so this is no big deal.I hope this helps others with similar install problems.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
