Low Cost Supreme Pondmaster AP-40 Pond Air Pump 2900 cu. in. per Minu

Supreme Pondmaster AP-40 Pond Air Pump 2900 cu. in. per MinuBuy Supreme Pondmaster AP-40 Pond Air Pump 2900 cu. in. per Minu

Supreme Pondmaster AP-40 Pond Air Pump 2900 cu. in. per Minu Product Description:



  • 1 year warranty
  • 6 1/2" x 10" x 7 1/2" high.

Product Description

This unit has been designed to satisfy the requirements of a multitude of water-related applications, such as oxygenating indoor and outdoor water features, aerating single or multiple aquariums or terrariums, or de-icing outdoor installations during harsh winters. It has been designed to operate efficiently with a motor that is non-oil lubricated. For outdoor applications, it is recommended that the water-resistant (not water-proof) ABS plastic unit be enclosed with allowance for air circulation to protect it from the elements. Comes with an air diffuser with 12 hose barbs, 3" piece of black tubing, 2 hose clamps. Good for up to 5,000 gallon ponds, has a 6' power cord; uses 40 watts; max water depth: 10'; air flow: 2900 cubic feet per minute. Size: 6 1/2" x 10" x 7 1/2" high. Uses 5/8" tubing or 3/16" tubing with included diffuser

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
4Powerful and good air pump
By mgx
I've been using this pump for my outdoor pond for a few years now and it's great and still running.It's easy to maintain, just don't let it get dirty and clean out the filter every now and then. The filter has easy access in the back of the pump. The original filter element becomes rather flimsy after a few washes and should be replaced from time to time. However, I don't think this is unexpected for any pump.It comes with a plastic air manifold which not very good. It's probably better to buy a separate, quality manifold for distribution of air. Or you can modify it for temporary use until it breaks then you can get a quality manifold. The manifold itself, has too many outputs (more than efficiently necessary), none of which can be closed, so unless you're using them all, you're wasting a lot of air. I just used hot-glue to seal the outputs I didn't want to use. The manifold itself isn't even quality plastic so the outputs will eventually snap off especially if used outdoors.Discounting the shoddy air manifold attachment, it's a great pump, with good output and easy care.Update 4/14/2013:The original plastic air manifold finally fell apart, the plasic was so brittle it was leaking air everywhere and I bought this metal air divider which is working great so far: Hydrofarm AAPADIV6 Active Aqua 6-Outlet Copper Air Divider.Meanwhile, the air pump still runs like a champ.

3 of 3 people found the following review helpful.
4Lots of bubbles
By L. Wilson
I have a pond (or a pool, since it is pretty small) that needs some circulation--it has a muddy bottom and lot of leaves and other organic crud. I tried water pumps, but they always get clogged.I got one of these, put a garden hose on it (cut off the ends and shoved them onto the pump and the aerator that came with it) and dropped the aerator into about 7 feet of water(with a brick to hold it down). It works great. In only a couple of days, the water is a lot clearer. It looks like the bubbles will be plenty to help the fish survive when the water gets low and during the winter.This is made for a small pond. It is not going to aerate an acre, but it is still putting out a lot of air. The aerator is made so that you could connect a dozen aquariums to it, but they would need to be pretty big aquariums, since it puts out a LOT of air.The only thing annoying is that I had to put it in an enclosure to protect it from the weather. It would have been nice if it had been weatherproof. Also, if you use it inside, the noise would probably drive you crazy. Outside, it is not a problem because you have to be pretty close to hear it.

1 of 1 people found the following review helpful.
5Supreme Pondmaster AP-40, Great Product
By Fleaboy
I have a six foot long, 150 gallon fresh water tank, and I'm using a combination of two bubble wands to form a five-and-a-half foot curtain of air bubbles in the background. The tank is 30 inches deep, and at different times, I've used a Tetratec Deep Water DW96-2 and a Super Luft SL-65 to drive the bubble wands, and an additional air stone. Both the Tetratec and SL-65 have been able to create bubbles, but were not able to create the curtain effect I had hoped for. A metal part in the SL-65 failed after about a year and-a-half,... the AP-40 was bought as a replacement. The Supreme Pondmaster AP-40 succeeded in creating the curtain of bubbles I was looking for, and is so effective, that I have to bleed off excess air though an open valve to atmosphere. Granted the AP-40 is more expensive than the other pumps, however my intent when I bought the other two air pumps was to find an air pump that could create the curtain of bubbles, (cost at the time was not a consideration). I believe I may have been able to achieve the same affect with the Supreme Pondmaster AP-20, but I wanted to err on the positive side. An added benefit,... the AP-40 I received is no louder than either of the other two air pumps. Great product. Very satisfied.

See all 4 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Supreme Pondmaster AP-40 Pond Air Pump 2900 cu. in. per Minu

Low Cost CPR Aquatics CS50 Siphon Overflow [Misc.]

CPR Aquatics CS50 Siphon Overflow [Misc.]Buy CPR Aquatics CS50 Siphon Overflow [Misc.]

CPR Aquatics CS50 Siphon Overflow [Misc.] Product Description:









Product Description

A built-in overflow is the most efficient method of draining aquarium water to a filter. If your aquarium does not have built-in overflow, CPR Aquatics Siphon Overflows are the best means for getting water from an aquarium to a filter system without expensive modifications to the tank. They quietly skim up to six times more water than units with tubes. We highly recommend using the Aqua Lifter pump with your CPR Overflow to maintain siphon.

Customer Reviews

Most helpful customer reviews

4 of 4 people found the following review helpful.
5Necessary if your tank isn't plumbed
By R. Williams
I have this hooked into my protein skimmer and it works good. Be sure to turn your skimmer off when you feed because it will suck the feed into itself and waste it. It's kind of a pain to flush out the unused food and junk in the bottom of it but with a good turkey baster, it can be done. Naturally an integrated overflow system in the tank is ideal but this is a good add on if you have to. Get the aqua lifter doser pump to maintain your siphon if the electricity goes out. Cheap insurance. They should just include it with the overflow.

1 of 1 people found the following review helpful.
5exelente
By Daniel
exelente producto es de alta calidad y muy facil de ensamblar si lo van a compra pidanlo de una vez con la bomba TOM Aquarium Aqua Lifter Pump 3.5gph flow rate to 30 inches height con asa bomba funciona al 100%

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy CPR Aquatics CS50 Siphon Overflow [Misc.]

Get Cheap BZ The Big Bruddah Body Board (45-Inch)

BZ The Big Bruddah Body Board (45-Inch)Buy BZ The Big Bruddah Body Board (45-Inch)

BZ The Big Bruddah Body Board (45-Inch) Product Description:



  • Bodyboard designed for big riders, can float you like a long board
  • 45-inch length, 23-inch width
  • VFS (variable flex) stringer provides good flexibility and a snappy return
  • Zero-G polypropylene core provides steroid strength and light weight
  • Suryln bottom provides maximum flexibility, increased speed

Product Description

The Big Bruddah 45" Body Board. Colors come in: white & blue with yellow trim, white& blue with yellow & red trim, blue & yellow with blue & yellow trim, red & blue with white trim, white & blue with blue trim, yellow & black with red & yellow trim.

Customer Reviews

Most helpful customer reviews

10 of 11 people found the following review helpful.
5134ever
By Sean F. Peterson
I'm 6'2" tall and 230 lbs. - this board is perfect. I'm tearing it up like I was a kid again...Handles as good as any pro board. It arrived in only a couple of days and in perfect condition.

2 of 2 people found the following review helpful.
5Best gift ever
By Eva L. Mortimer-maibeth
I got this for my boyfriend for xmas. He loves it. Hes 195lbs, 6ft and the board rides perfect for him. His brother tried it and hes 230lbs, 6'3 and he loves it also. Good pick for the bigger and taller

2 of 2 people found the following review helpful.
5Worth The Money
By Jeffrey Lilly
Yes kinda expensive, but absolutely amazing performance. I'm 6' 1" and well over 200 pounds and this board carried me well. I had a wonderful time with it on outer Cape Cod a couple of weeks this summer. Just time it right and you can get on the curl of every good wave. I recommend this board without hesitation. the only think I haven't figured out is the lack of a tether. Also, the company that does fulfillment for this product performed very well. They communicated and managed to correct a mistake before it happened.

See all 5 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy BZ The Big Bruddah Body Board (45-Inch)

Discounted BZ Advantage 42.5" Bodyboard

Buy BZ Advantage 42.5" Bodyboard

BZ Advantage 42.5" Bodyboard Product Description:



  • Bodyboard for larger riders and intermediates looking to advance their skills
  • 42.5-inch length, 22-inch width
  • Strong, high-density PH core
  • Crescent tail helps lock the body in position
  • Channels help maintain control and provide increased speed in bigger surf

Product Description

Slick X 42.5" Body Board

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
4Great Board
By SomeBlerk
I bought this for my 8 y/o son who loves it. It definitely helps him catch waves as it is stiff and well made. I use it aswell and have loads of fun with it. Great for smallish East Coast surf though I wont be trying Pipeline or Teahupo'o with it....

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy BZ Advantage 42.5

Where Can I Buy Curt Manufacturing 31005 Winch Mount Handles

Curt Manufacturing 31005 Winch Mount HandlesBuy Curt Manufacturing 31005 Winch Mount Handles

Curt Manufacturing 31005 Winch Mount Handles Product Description:



  • Made in USA
  • For Vehicle Hitches and Accessories
  • For Years N/A to N/A

Product Description

Item Type: Winch Mount Handle

Position: Front

Color: Black

Material: Steel

Exterior Finish: Powder Coat

UM: Each

Warranty One Year Limited

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
5Worth the price
By tompierre
I built a custom winch mount using these handles. I attached them to a TUFF STUFF UNIVERSAL WINCH MOUNTuniversal winch mount plate, which I then mounted on 2" square tubing, so I could move it between the Reese Towpower 65021 Front Mount Hitch Receiver that is installed on all my trucks. Yes they are expensive, but they really do the job of easily moving my winch around. Why the funny C shape of these handles? When mounted, they allow you to quickly wrap your winch cable between the handles if needed. Just too convenient.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Curt Manufacturing 31005 Winch Mount Handles

Compare Astatic Omnidirectional Dynamic Desk Top Microphone with Locking Push to Talk Switch

Astatic Omnidirectional Dynamic Desk Top Microphone with Locking Push to Talk SwitchBuy Astatic Omnidirectional Dynamic Desk Top Microphone with Locking Push to Talk Switch

Astatic Omnidirectional Dynamic Desk Top Microphone with Locking Push to Talk Switch Product Description:



  • Omnidirectional Pick-up
  • Push-to-talk with locking switch
  • Stripped and tined cable
  • Hi or Low impedance output
  • External Contact Closure

Product Description

Astatic Omnidirectional Dynamic Desk Top Microphone with Locking Push to Talk Switch

Customer Reviews

Most helpful customer reviews

3 of 3 people found the following review helpful.
5Salon PA system
By target'
It is holding up very well - as it gets used rather roughly, 7 days a week, by receptionists at a very busy hair salon. I already got a back-up for when they break it, I mean when it wears out. Better than the Radio Shack mics I replaced every several months and has good sound clarity.

1 of 4 people found the following review helpful.
3It is an incomplete product
By Jaime
It is a good product but does not bring the connector, I think the sell deveria include the connector no problem to connect to

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy Astatic Omnidirectional Dynamic Desk Top Microphone with Locking Push to Talk Switch

Sale AEM 24-6003C Gun Metal V2 Induction System

AEM 24-6003C Gun Metal V2 Induction SystemBuy AEM 24-6003C Gun Metal V2 Induction System

AEM 24-6003C Gun Metal V2 Induction System Product Description:



  • Outperforms every intake system on the market, even our own Cold Air intakes
  • AEM's lifetime DRYFLOW Synthetic air filter is up to 99.52% efficient in FINE DUST testing, filters dirt as small as one micron, and never needs filter oil!
  • Patent #6,959,679
  • Manufactured and assembled in the USA
  • Guaranteed for life

Product Description

AEM’s V2 intake systems use a patented dual chamber design that maximizes horsepower and torque - producing even more power that our own Cold Air systems. On a dyno graph, the area under the power band (or power curve) represents the amount of effort that an engine is producing. The larger the overall area under the curve, the more power your engine is making. The AEM V2 utilizes a dual chamber (using two different diameters and lengths of piping) that creates multiple frequency sound waves to produce the largest area under the curve of any intake system on the market. These sound waves help charge the cylinders with more air throughout the entire rpm range and are what enables the V2 to outperform even our own Cold Air systems. We have found that inlet length plays a vital role in the power production of V2 systems and not all V2 induction systems relocate the filter outside of the engine compartment. In these cases, we performed extensive temperature testing to locate the filter in the coolest area of the engine compartment to achieve the lowest inlet temperatures possible. Please refer to our temperature testing procedures for more information.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
4Great item, just what I wanted
By ViCd@mOnE
As soon as I got this item, I installed it in my integra right away...sounds awesome and you don't hear it when your cruising.I feel a difference in power,especially while rising past 3 to 4000 rpm's..not a true cold air because the filter sits higher than the average cold air intake. It's always raining where I live and the filter does not get wet, but i do recommend the micromesh water guard....great product!!

0 of 0 people found the following review helpful.
5Well built product
By Rotary
Order came fast. Product did not show up damaged, well packaged all items were there with product. Currently installed, does provide hp gain as well as rpm ramp up from low speed. Intake Also caused denser air charge that can be felt driving in mid rpm by sudden burst in power delivery. All in all good buy for cost

See all 2 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Buy AEM 24-6003C Gun Metal V2 Induction System