Where Can I Buy Curt Manufacturing 14082 Class IV Receiver

Buy Curt Manufacturing 14082 Class IV Receiver

Curt Manufacturing 14082 Class IV Receiver Product Description:

• 2" Heavy Duty Receiver Tube Opening
• Gross Trailer Weights (GTW) and Tongue Weights (TW) vary by application
• Never exceed vehicle weight rating
• Hitch Ball sold separately
• Limited Lifetime Warranty to original purchaser

Product Description

CURT’s complete line of American made Class 4 receiver hitches feature a high-gloss powder coat finish over a rust preventing A-coat base for superior protection and appearance. This makes them the most corrosion resistant aftermarket hitch available, as the more advanced A-coat outperforms E-coat in salt spray tests. CURT hitches undergo advanced, real-life testing. They are designed and built for safety, great fit and appearance. CURT’s class 4 receiver hitches have a 2" receiver tube opening with 10,000 lb. weight carrying capacity and 12,000 lb. weight distributing capacity.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
85 4x4
By nikonnoah
got hitch for 4x4. drilled frame and mounted up. looks good and works well. looked at others and this one looked the best for what i needed.

0 of 0 people found the following review helpful.
Will NOT fit a 73-91 Suburban... but did it say that???
By Marie Marcogliese
I bought this hitch for obvious reasons: Class IV hitch for a class II price. Excellent! The BIG type said it fits my '87 Sub, but it won't w/out replacing/relocating my gas tank. Went back to Amazon site and found it says "in SMALL type: "This will fit your '87 Suburban. EXC CARRYALL/SUBURBAN/PANEL." So, WTF is it telling me it fits my 87 Sub? Dugh! Bottom line I'd like to keep this hitch as have been looking for a long time for this bargain. Can I make it fit and will it be a safe class IV hitch? We shall see.When I received the hitch I was ecstatic. Then utterly dismayed and angry when I found it didn't just bolt right up. This hitch is for pick up trucks w/straight 34" rails and a spare tire hanging underneath. NOT a Suburban w/a rear GAS TANK between the rails. Be warned! Read the SMALL print over and over, then triple check the manufacturers info... and then triple check it all again. The only consolation I have is that if I can't make it fit, then it was such a deal that I know I'll get my money back selling it on Craigslist to a guy with a Chevy PICKUP. Screw return shipping.As they say: "Buyer beware."

0 of 0 people found the following review helpful.
Make sure fame is flat
By Shawn
I wish this would fit my suburban like it said it would. If I mount it the stinger points to the ground since my frame tapers at the end. If I slide it inward then I will have to relocte my fuel tank. Not happy with the time and effort put into this to find out it will not work.I did find the only one that will fit 73-91 chevy suburban CURT Trailer Hitch #13017I dont know why the 14082 would even come up on the search. I hope this helps someone save from the reshipping costs.

See all 5 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Deals for Curt Manufacturing 14080 Class IV Receiver

Buy Curt Manufacturing 14080 Class IV Receiver

Curt Manufacturing 14080 Class IV Receiver Product Description:

• 2" Heavy Duty Receiver Tube Opening
• No drilling required
• Never exceed vehicle weight rating
• Hitch Ball sold separately
• Made in USA. Limited lifetime warranty to original purchaser

Product Description

CURT’s complete line of American made Class 4 receiver hitches feature a high-gloss powder coat finish over a rust preventing A-coat base for superior protection and appearance. This makes them the most corrosion resistant aftermarket hitch available, as the more advanced A-coat outperforms E-coat in salt spray tests. CURT hitches undergo advanced, real-life testing. They are designed and built for safety, great fit and appearance. CURT’s class 4 receiver hitches have a 2" receiver tube opening with 10,000 lb. weight carrying capacity and 12,000 lb. weight distributing capacity.

Customer Reviews

Most helpful customer reviews

1 of 1 people found the following review helpful.
great upgrade
By John
I bought this for my 2001 Yukon XL so that I could maximize my towing capacity. I don't know why GM doesn't put on a heavy duty one to begin with. I like how the receiver sits higher up and hugs the bumper. The stock one hung too low. The one I got has one of the bumper mounting holes slightly off and I will need to grind this part out. I also wish that this receiver would have had an attached bracket for the wire harness like the stock one. For the price and towing capacity this was a great value. I would have given 5 stars if the one mounting hole would have lined up right.

1 of 1 people found the following review helpful.
Good receiver, sub-par hardware
By JLG
The receiver seems to be high quality in its construction. There were some weld splatters in a couple areas that got powder coated over, but that's not a big deal to me. What I wasn't impressed with was the fact that the factory Class III hitch I removed from the vehicle was attached with grade 10.9 hardware. The hardware that came with the hitch was all class 8.8. I'm sure it's probably fine, but I have a hard time putting a stronger receiver on my vehicle using weaker hardware. I e-mailed Curt Manufacturing and they gave me a line about how their testing showed that 10.9 hardware was brittle and they found the grade 8.8 hardware to be sufficient. It may be sufficient, but line the about 10.9 being brittle is simply not true. I ended up reusing some of the hardware and purchasing SAE grade 8 bolts for 4 of the mounting locations. It may be overkill, but I feel better about it.

0 of 0 people found the following review helpful.
Bent
By rocket 88
Could only get a couple bolts to line up so I took it off and noticed the driver side mount was bent. At the cross bar it is 37 1/2" wide and at the ends of the mounts its 37 1/8". So 3/8" of an inch difference. Not to mention it has dropped $40 in price since i ordered it.

See all 6 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!

Discounted Curt Manufacturing 14008 Class IV Receiver

Buy Curt Manufacturing 14008 Class IV Receiver

Curt Manufacturing 14008 Class IV Receiver Product Description:

• 2" Heavy Duty Receiver Tube Opening
• No drilling required
• Never exceed vehicle weight rating
• Hitch Ball sold separately
• Made in USA. Limited lifetime warranty to original purchaser

Product Description

CURT’s complete line of American made Class 4 receiver hitches feature a high-gloss powder coat finish over a rust preventing A-coat base for superior protection and appearance. This makes them the most corrosion resistant aftermarket hitch available, as the more advanced A-coat outperforms E-coat in salt spray tests. CURT hitches undergo advanced, real-life testing. They are designed and built for safety, great fit and appearance. CURT’s class 4 receiver hitches have a 2" receiver tube opening with 10,000 lb. weight carrying capacity and 12,000 lb. weight distributing capacity.

Customer Reviews

Most helpful customer reviews

0 of 0 people found the following review helpful.
Easy install
By Zaner3879
The hitch seems to be everything I wanted, well built and well finished. The hardware that came for the install wasn't what it should be that's the reason for the four star rating.

See all 1 customer reviews...


Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!