Buy Curt Manufacturing 14080 Class IV ReceiverCurt Manufacturing 14080 Class IV Receiver Product Description:
- 2" Heavy Duty Receiver Tube Opening
- No drilling required
- Never exceed vehicle weight rating
- Hitch Ball sold separately
- Made in USA. Limited lifetime warranty to original purchaser
Product Description
CURT’s complete line of American made Class 4 receiver hitches feature a high-gloss powder coat finish over a rust preventing A-coat base for superior protection and appearance. This makes them the most corrosion resistant aftermarket hitch available, as the more advanced A-coat outperforms E-coat in salt spray tests. CURT hitches undergo advanced, real-life testing. They are designed and built for safety, great fit and appearance. CURT’s class 4 receiver hitches have a 2" receiver tube opening with 10,000 lb. weight carrying capacity and 12,000 lb. weight distributing capacity.
Customer Reviews
Most helpful customer reviews
1 of 1 people found the following review helpful.
great upgrade
By John
I bought this for my 2001 Yukon XL so that I could maximize my towing capacity. I don't know why GM doesn't put on a heavy duty one to begin with. I like how the receiver sits higher up and hugs the bumper. The stock one hung too low. The one I got has one of the bumper mounting holes slightly off and I will need to grind this part out. I also wish that this receiver would have had an attached bracket for the wire harness like the stock one. For the price and towing capacity this was a great value. I would have given 5 stars if the one mounting hole would have lined up right.
1 of 1 people found the following review helpful.Good receiver, sub-par hardware
By JLG
The receiver seems to be high quality in its construction. There were some weld splatters in a couple areas that got powder coated over, but that's not a big deal to me. What I wasn't impressed with was the fact that the factory Class III hitch I removed from the vehicle was attached with grade 10.9 hardware. The hardware that came with the hitch was all class 8.8. I'm sure it's probably fine, but I have a hard time putting a stronger receiver on my vehicle using weaker hardware. I e-mailed Curt Manufacturing and they gave me a line about how their testing showed that 10.9 hardware was brittle and they found the grade 8.8 hardware to be sufficient. It may be sufficient, but line the about 10.9 being brittle is simply not true. I ended up reusing some of the hardware and purchasing SAE grade 8 bolts for 4 of the mounting locations. It may be overkill, but I feel better about it.
0 of 0 people found the following review helpful.
Bent
By rocket 88
Could only get a couple bolts to line up so I took it off and noticed the driver side mount was bent. At the cross bar it is 37 1/2" wide and at the ends of the mounts its 37 1/8". So 3/8" of an inch difference. Not to mention it has dropped $40 in price since i ordered it.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
