Buy Neo-Flex LCD ArmNeo-Flex LCD Arm Product Description:
- LCD Size: ? 22"; Capacity: < 18 lbs / 8.2 kg; Lift: 8" / 20 cm; Tilt: 180°; Pan: 360°; Rotation: 360° P/L
- VESA: MIS-D, 100/75, C (hole pattern: 100 x 100 mm or 75 x 75 mm)
- Warranty: Three (3) years
Product Description
This Arm adds flexibility to your LCD. Simply push the side button while lifting the display, then position it where you want it. Get ergonomic comfort for a great price.
Customer Reviews
Most helpful customer reviews
70 of 72 people found the following review helpful.
Good at this price point
By Jay Brandt
I bought 2 of these - one for my little 17" secondary monitor and one for my wifes 24" primary montor.On the 17", everything went very smoothly and setup was simple. The one issue you should keep in mind with this arm is that it's tight - very tight, so when you attach a lightweight monitor to it, you'll need more than average force to move it into place.On the 24", things were more interesting. Technically, this arm isn't rated for a monitor this large, but as I've discovered with other arms, the size of the monitor is mostly irrelevant - it's the weight you have to keep in mind and the 24" monitor fell under the weight this arm is rated for, so that wasn't the problem. The issue we ran into with this montor arm is not really a "full range of motion" arm. Its range of up/down movement is much more limited than you find on other, more expnsive arms - at a guess, I'd say you only have 20 or 25 degrees of motion you can move it through. This meant that we couldn't actually mount the arm where we wanted to on her desk and had to find an alternative, which, after an hour of futzing around, we did and all was well.So, while this is a fine arm for the money and definately better than any others I've seen for this price, you do get some limitations that come with it. Overall, it's perfect for my small 17" secondary monitor, but if I were buying for my wifes monitor again, I'd probably buy another Ergotron LX like I use for my 28" main montor because of the overall range of motion it gives.
39 of 39 people found the following review helpful.
Great product, even if it is last years model
By Billy D
I absolutely love this LCD arm. When I was looking for a new LCD monitor, I was shocked to find that most of the LCDs on the market today do not have the ability to rotate to portrait mode. That feature is really only found on the Dell ultrasharp LCDs, which cost much more than most LCDs on the market today.After doing some research, I came across the Ergotron website and found the "new" model of this arm for double the cost of the one listed above. The model listed above is last years model, but the only real difference is the style/looks. I still say this arm is very stylish.In the box, you will find all the parts needed to mount the arm a variety of ways. The most common way is to clap it to the rear of your worksurface, but a grommet is also included so that you could drill a hole through your surface and clamp it to the hole.The arm is very strong (the manufacturer says it can hold up to a 20", but I am using a 22" samsung 226BW widescreen LCD with no problems). The arm can be lowered or raised 6-8" (maybe more), and the LCD can be tilted up/down, and rotated. All this can be done without having to move any cables.If you are looking for a great way to easily turn your LCD from landscape to portrait mode, this is a great choice. It makes reading documents (PDFs, websites, etc) much easier (especially if you have a widescreen LCD).
59 of 63 people found the following review helpful.Versatile, well designed, well made, aesthetically pleasing product
By B. Cunningham
The Neo-flex stand might seem pricey to some, but this is a case of getting what you pay for as it is well worth the money. This stand is versatile: You can remove the extension to shorten it and it comes with parts for either a surface edge or grommet mount. The machined aluminum parts and overall aesthetic of this LCD panel VESA mount are beautiful -- and made to last. The directions have no text, but surprisingly the drawings are so well done that I understood every step of the disassembly and reassembly process (I only did this because I shortened it and then changed my mind later: It comes packaged with the extension and surface edge mount version installed and ready to go). Every joint either pans, swivels or tilts. Nothing but praise for this item (my only minor complaint is that there are no spare parts included, so don't lose any unpacking).
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
