Buy Broan F403004 30-Inch Two-Speed 4-Way Convertible Range Hood, Stainless SteelBroan F403004 30-Inch Two-Speed 4-Way Convertible Range Hood, Stainless Steel Product Description:
- Contemporary styling
- Four-way convertible; installs ducted 3-1/4-Inch by 10-Inch (vertical and horizontal), 7-Inch round (vertical) and non-ducted
- Dishwasher-safe aluminum grease filter
- 7-Inch round plate included
- Stainless steel
Product Description
Broan-NuTone F403004 30 Inch Range Hood, Stainless SteelSince their beginning in 1932, Broan has pioneered many of the product innovations now established as standards of the industry. Today, Broan carries on the commitment to provide the finest products in the industry.Broan-NuTone F403004 30 Inch Range Hood, Stainless Steel Features:; Broan 43000/F40000 Broan F40000; Stainless Steel Range Hood; Four-way convertible; installs ducted 3-1/4" x 10" (vertical and horizontal), 7" round (vertical) and non-ducted; 160 CFM, 6.5 Sone (3-1/4" x 10" discharge) or 190 CFM (7" round discharge) performance ?â?ó?ó?ÇÜ?¼" HVI 2100 Certified; Dishwasher-safe aluminum grease filter; Includes 3-1/4" x 10" damper/adapter and 7" round adapter
Customer Reviews
Most helpful customer reviews
45 of 45 people found the following review helpful.
this was perfect for my needs!
By Nanciejeanne
I never had a stove without a range hood, but when I moved in my new house (which is actually a very old house) there were only cabinets above the stove. No hood at all. I really missed the light the most! Venting would have been very difficult as the house is made of stones, and the walls inside are concrete blocks with metal mesh holding plaster. Not a simple drywall type installation at all. So I decided a ventless hood was the best and easiest option for me. I worried that it wouldn't be effective, but it does a surprisingly good job at moving air. A little noisy, but most hoods I have ever owned were slightly noisy. There is a clip-on cover for the front little vents if you indeed have a vented option.I did not know that hood was not shipped with the extra filter needed for ventless operation. There is a mesh cover for the fan, but it is not a filter. Further, the item amazon featured on the hood product page was NOT the one that went with this. I went to the Braun website and still was confused. I finally found the right one: it is this one:Broan #41F Range Hood Filter. There may be non-Broan brand filters available, but I wanted to be sure I got the right one, so I went with the name brand the first time. This filter is installed with the blue side next to the blade and then put the included mesh screen over that. There is a clip that holds them in place.The hood does require hard wiring. I did not have that either!! (Why are these projects always so complicated?!!!) However, there is an item available (and noted on the Broan website) called BR-HCK44 - Range Hood Power Cord Kit. It is "for use when hard wiring is not an option and a plug is needed." There is also a wall mounting bracket (BR-35) for installations where there is no upper cabinetry. I didn't need the bracket as I had upper cabinetry. I don't think either are available here on amazon, but just google the model number/name and you will find one. They are relatively inexpensive.I actually had to run my new plug cord down the wall and use the outlet behind the gas stove. If you have a similar problem, here is my solution, maybe it could work for you, too. I was putting in a glass tile backsplash behind the stove anyway, and wanted wood or ceramic border to "frame" the small tiles. I figured I could use the recess of one of the trim pieces to hide the cord as it ran down the wall and then simply plug it into my grounded outlet behind my gas stove. (Most gas stoves need an outlet behind them for clocks, electric ignition, timers, oven light, etc.) I couldn't find any ceramic that worked, but instead routed out some trim molding with a dremel, tucked the cord behind that channel, and used the wood to frame my tile backsplash. The wood should be safe, it is no closer than any adjacent cabinetry would be. You can't tell there is a cord there, and it is pretty protected from bumps since it is behind the molding. (I just used little finish nails in case I need access to it in the future. I put them in the wood first so I wouldn't nick the cord.) I did need a short grounded extension, too...the add-on cord was only 3 feet long, but the ugly stuff is behind the stove. It was a tricky problem, and some of you may already have wiring in place, but just in case you run into something like I did, I thought I would post my work-around! Maybe I will post a picture of it one of these days!One more tip...if you have to install this by yourself (like I did) it is HARD holding the thing up with one hand (and your head!) and marking the holes for drill/screws with the other! SAVE your packing box, put it on your stove and put the hood on top. It will hold your hood very close to its final position for you so you can make the marks for the screws! I think I added another little amazon box so it sat high enough. OR use the cardboard from the box to make a template for where the drill holes need to be (it is easier to hold cardboard than a range hood!)
74 of 80 people found the following review helpful.
Noisy, but does the job
By Robert D. Miller
For the money, i guess it is unfair to expect a whisper quit unit, so you get what you pay for with this.I was replacing a very old Broan hood, so i got this mainly because i had hopes that it would fit the space i had with minimal fuss and this did hold true and thereby accomplished my primary goal.I was a bit amazed that being 30 years newer, the filter arrangement was so flimsy compared to the one i was replacing. I'll just have to live with that. This unit is also noticeably noisier than the original as well.One thing that also surprised me was that if you vent the unit out through the wall, there is a vent in the front that must be covered up with a cheesy looking black plastic cover. I didn't notice it in the pictures on the amazon web site, but it is very noticeable in my kitchen. This is the result of having chosen a 'convertible' unit. I could not discern what the term actually meant and assumed it meant venting through the back or the top. In the end, i think it means you can use it vented through the wall or just recycle the air indoors.My experience is a reminder that buying this type of product online is fraught with decisions that are costly to recover from, if made without understanding exactly what is being selected. This is made all the more difficult because Broan offers many, many units to pick from and their description of what makes the units unique are amazingly vague and difficult to understand, even after going to their web site and downloading the instructions beforehand. Additionally, i found it impossible to find any local stores who carry these in stock, so it is impossible to do that type of legwork first.In the end, it might be unfair to give only two stars for this product, since you basically are getting about the cheapest hood you can buy, so the rating really reflects the frustration of not being presented with enough intelligible information that i might have been able to pick a unit that more closely matches what i was attempting to get.
14 of 14 people found the following review helpful.
Great little hood for the price!
By Virginia M. Quinn
Our builder-grade (G.E. brand) hood bit the dust so we bought this one. Fully expected I'd have to hire an electrician, so we "uninstalled" our other unit to save time (because electricians charge by the hour). When we got it out (four screws!) we looked at it and figured out that we could re-use the other unit's electrical plug on this unit (we have an electrical outlet in the cabinet above our hood) so we did. It took my husband and I about 30 minutes to install (one holding the unit, while the other one puts in the screws). It is versatile, too, because you could use it on just about any kind of vent (round or rectangular) and it fits beautifully. It is SOOO much quieter than our other one, and you can actually feel the air rushing past your hand when you turn it on(our other hood was never that efficient!) Checking online for other prices, the cheapest I could find was about $150 or thereabouts, so imagine my surprise when this one arrived in perfect condition, and was so easy to install! Awesome! I have a light and a fan again! Yippee!
See all 88 customer reviews...Latest Price:
See on Amazon.com!
More Info:
See on Amazon.com!
See Customers Review:
See on Amazon.com!
Buy Barbie Fashion Fever Vanity
I want a vanity table like this!
Beware: this is not leather