Buy PetSafe Deluxe Pet Panel Panels for Sliding Glass Doors 76-3/4 to 81 Tall, Large/Tall, WhitePetSafe Deluxe Pet Panel Panels for Sliding Glass Doors 76-3/4 to 81 Tall, Large/Tall, White Product Description:
- Heavy duty aluminum construction with shatter resistant Tempered safety glass
- Adjustable height for 76 3/4 In. to 81 In. with a 9 In. riser for long-legged dogs
- Reversible lock for right or left sliding doors, security cover may be installed on either side.
- Flexible, safe and not-toxic see-through vinyl flap
- Easy-to-follow installation manual.
Product Description
Unique self-adjusting design for an easy installation with no cutting required. Soft transparent all weather, energy conserving flap system reduces energy loss in winter and summer. Locking security cover may be installed on either side of the door. Adjustable height for 76 3/4 In. to 81 In. for regular patio doors and 93 In. to 96 In. for tall patio doors. Reversible lock for right or left sliding doors. Shatter resistant Tempered safety glass. Easy-to-follow installation manual
Customer Reviews
Most helpful customer reviews
79 of 80 people found the following review helpful.
By Cody Hinchliff
This dog door is a good solution to the issue of letting your dogs in and out through a glass door. The dog entrance/exit panel works fine and the door fits conveniently against the side of the house. However, it is only single-pane glass, and the sealing hardware that ships with it is not of good quality, so expect to make a trip or two to the hardware store if you live in a very cold climate and don't want your house leaking heat like a sieve in the winter. The single-pane glass also gets very cold and collects condensation. The installation instructions are acceptable but not great, and I also had to buy better screws than provided to get the door installed. If you want this panel to be secure (i.e. you want to be able to lock the door) you will need to drill *at least* four screw holes into the frame of your sliding glass door, to attach the pet panel. Most people will probably want to do six: two to secure the top, two on bottom, and two on the door itself to attach the locking mechanism.
49 of 50 people found the following review helpful.
By Dave
I have an older home (built in '73) with a large sliding door that goes out to a Florida Room. I purchased the medium for the cats, my door measured about 78" high, and it works great. Installation was pretty simple. I was a little worried this might be set up for newer sliders, although I'm not sure if the set up for sliders has changed in the last 30 years. But you never know.The top of the panel is spring loaded which is nice. You just tilt the panel at an angle, and place it into the upper track, lift up up gently and place move the bottom into the lower portion of the track. Using your hands and feet, just kinda bump it up against the wall portion of where the slider opens to ensure a snug fit against the wall, and presto.I used the provided drill bit to drill the holes to secure the spring loaded portion as the directions state. This would prevent any one from lifting it out of the track and entering the home if your sliders lead directly outside rather than a porch, lanai, etc...Placed the door sweep on the back of the slider that butts up against the panel, and the weather stripping to the front of the slider that meets the panel and good to go. Installation took maybe 45 mins. The longest part was putting on the door sweep and weather stripping. Making sure to put it on straight.Some installation tips:The door may tend to "wobble" slightly forward and back in the upper track. I used the cardboard spacers of which you should find two on either side of the upper spring loaded portion of the panel for packing. I just folded it over, placed it between the upper part of the panel and the lip of the track and it worked fine. Sorta like a shim. Cant see it from the front or back, and no need to drill any extra holes.When applying the door sweep to the back of the slider that butts up against the panel, give yourself plenty of rubber to lay up-against the other door to provide a good seal. I took a wooden ruler and measured from the outside of the slider frame where the sweep will stick, and found that about 1/4" to 5/16" works pretty well. My sliders are single pane, not sure if newer ones are double pane. I measured off tick marks about every 1.5 feet down the frame. That way it was easy to make sure the sweep went on nice and straight and provides a good seal.The foam weather stripping that goes down the front of the same slider that will meet up against the panel was fairly easy, I just ran it straight down using the indoor edge as a guide as my slider and pet panel met up flush on the front. Adjust as needed for your installation.Works great and I'm no longer attempting to air condition an uninsulated portion of the house!You may have to tape the flap up for a little bit for your pets to get used to going in and out (assuming again it's going out to a lanai, porch, etc...). I put my cats on the other side, taped it up, and coaxed them through with some treats. They are currently going back and forth with it up, at the end of the week I'll let the door down and see how they do.You can also view the installation directions (PDF) on the PetSafe website for more info.
30 of 32 people found the following review helpful.
By Iman
I INVESTED in this panel, it is expensive. I have had it for over 6 months, now. I have 3 cats that use it several times every day. I definately recommend it, dispite the cost, it has been worth every penny. My husband tapped in a couple pieces of thin wood(shims) to create a tight fit, and we put a piece of stick on velcro at the top edge where there was a small gap between the panel and the sliding glass door, and no bugs get in, the seal is tight. We use the patio door a zillion times a day, so the pet door panel has to be sturdy and it is.
Latest Price: See on Amazon.com!
More Info: See on Amazon.com!
See Customers Review: See on Amazon.com!
